Making the connections, En g l is h engl ish – Panasonic SCAKX12EG User Manual
Page 5
RQTX1290
5
5
E
N
G
L
IS
H
ENGL
ISH
Making the connections
Connect the AC mains lead only after all the other connections have been made.
Conserving power
The system consumes approximately 0.3 W when it is in standby mode. Disconnect the power supply if you do not use the system.
Some settings will be lost after you disconnect the system. You have to set them again.
(4
:)
(4
:)
B
A
Connect the speakers
Click!
Connect the antennas
Place the antenna where reception is best.
FM indoor antenna
Connect the AC mains lead
To household mains socket
AM loop antenna
Red
Black
Use the included AC mains lead with this system only.
Do not use an AC mains lead from other equipment.
Adhesive tape
Be careful not to
cross (short-circuit) or
reverse the polarity of
the speaker wires as
doing so may damage
the speakers.
Refer to “Using the auxiliary input” (Z 9) for
more information on AUX connection.
SC-AKX12_EG_en.indd 5
SC-AKX12_EG_en.indd 5
2/14/2011 10:49:07 AM
2/14/2011 10:49:07 AM