Panasonic ERGY10 - Manual (Page 6)

6
English
Notes
Trim body hair to 1 cm or less before using the comb
attachment for body hair and underarms/bikini area.
The comb attachment for body hair and underarms/bikini area
performs better when used on dry hair. When body hair is wet,
apply soap or foam for better performance. •
•
Cleaning
Cleaning with brush
1. Remove the trimmer from the charger.
Be sure to set the power switch to
“0•CHARGE” before you remove the
blade.
2. Remove the comb attachment.
3. Hold the main body, place your thumb
against the blades and then push
them away from the main body.
•
4. Brush off any hair trimmings from
the main body and from around the
blade.
5. Brush any hair trimmings out
from between the stationary
blade and the moving blade while
pressing down the cleaning lever
to raise the moving blade.
Cleaning in water
1. Remove the trimmer from the
charger.
2. Remove the blade.
3. Rinse off any hair trimmings that are
sticking to the blades with running
water.
4. Rinse out any hair trimmings that are
inside the trimmer with running water.
5. Gently shake the trimmer 4 or 5 times and then wipe off
any water drops from the trimmer and the blade.
6. Place the trimmer on a towel with the power switch
on the main body facing downwards to let it dry fully.
Lubrication
Apply the oil to the trimmer before and
after each use.
Apply a drop of the oil to the points
indicated by the arrows.
Remounting the blade
Fit the mounting hook into
the blade mounting on the
trimmer and then push in
until you hear a click.