Panasonic KXTGA807FX User Manual
Page 8
8
Registering the handset to the KX-TG8070/KX-TG8090 base
unit
Make sure that the batteries are installed correctly.
1
Press and hold {x} on the base unit for about 5 seconds until a beep is heard.
• If all registered handsets start ringing, press {x} to stop, then repeat this
step.
• After a beep is heard, the rest of this procedure must be completed within
1 minute.
2
{
MENU} (right soft key)
i
r
i
{OK}
3
{^}
/{V}: “
Registration
”
i
{OK}
4
{^}
/{V}: “
Register Handset
”
i
{OK}
5
{^}
/{V}: Select a base unit number.
i
{OK}
• This number is used by the handset as a reference only.
• The registered base unit is indicated by “@”.
6
“
Enter PIN
” is displayed. Enter the base unit PIN (default: “
0000
”).
i
{
OK}
• If you forget your PIN, consult your nearest Panasonic service centre.
• When the handset has been registered successfully, w will stop flashing. If
the key tone is turned on, a confirmation tone will be heard.
Note:
• The KX-TG8070 does not feature an answering system.
• Answering system features are available only when this handset is registered
to the KX-TG8090.
TGA807FX(fx).book Page 8 Friday, August 3, 2007 10:18 AM