Printing, Placement, Preparing the remote control – Panasonic SCHTE180EG User Manual

Page 4: Confidential

Advertising
background image

4

R

Q

T9939

4

Placement

When the TV is less than 50 k

g, and the pedestal of the

TV is within 700 mm (width) by 365 mm (depth), you can
put the TV on top of the system.

Otherwise, put the system at the right side
(recommended) of the TV or in a rack.

Note:
• Do not put the system in a metal cabinet.
• Keep other 2.4 GHz frequency band electronic devices

such as wireless router, cordless phone, etc. at least 2 m
away from this system to avoid wireless interference.

• If irregular colouring occurs on the TV, switch off the TV for

30 minutes. If the demagnetising of the TV does not correct
the problem, increase the distance between this system
and the TV.

• Keep magnetised items away. Magnetised cards, watches,

etc., can be damaged if put too near to the system.

Preparing the remote control

Before using

Remove the insulation sheet.

Replacing the battery

Replace with a new battery (CR2025 lithium battery).

1

While pressing the stopper, pull out the battery
holder.

2

Insert a new battery with the (+) side facing up.

3

Push the battery holder back fully.

CAUTION!
• Keep the TV within the surface of the system. Be

careful not to tip over the TV as it can cause injury.

• Install the anti-tip device for your TV. For installation

details, refer to the operating instruction for the TV. If
your TV does not come with an anti-tip device,
consult your dealer.

• Moving the TV on the surface of the system can

scratch the surface of the system. Lift the TV when
you need to move it.

700 mm

365 mm

CAUTION!
Keep the button-type battery out of reach of children to
prevent swallowing.

Insulation
sheet

RQT9939-Z.book Page 4 Monday, February 10, 2014 6:17 PM

printing

Confidential

Until:

10 Mar 2014

Advertising