AYRE AX-7e - Manual (Page 5)

Connections and
Installation
The Ayre AX-7e is easy to connect and use. The
following guidelines will ensure that the installation
goes smoothly.
Location
Be sure to provide at least
three inches (75 mm) of air
space above the unit.
A good location for your integrated amplifier is in
an open-backed cabinet or on a shelf. The AX-7e
produces a moderate amount of heat during use.
It is important to maintain an adequate
supply of air flow to avoid overheating.
The infrared beam of the
remote transmitter will also
travel through glass.
The receiver for the infrared remote control is
mounted behind the display lens on the front panel.
A direct line of sight from the listening position
will ensure the maximum range.
Inputs
The Ayre AX-7e offers two pairs of balanced inputs
and two pairs of unbalanced inputs. Balanced
connections are made via three-pin XLR connectors,
3