Panasonic SCXH10EP - Manual (Page 11)

11
RQ
TX13
09
Getting S
tarted
Playing
Discs
Ot
her Op
era
tions
Reference
E
N
GLIS
H
You can enhance the audio effect for low volume 5.1-channel sound.
(Convenient for late night viewing.)
Press [W.SRD]F.
Each time you press the button:
ON
,------. OFF
Only when “Surround layout (Recommended)” mode is selected in
“Speaker layout” (B 8, Easy setup)
(Effective when playing 5.1-channel sound or when DOLBY PLII/“S.SRD”
(B 10) is selected.)
For “Surround layout (Recommended)” § mode:
Front speaker balance
For “Front layout (Alternative)” § mode:
Front and surround speaker balance
§ Selected mode in “Speaker layout” (B 8, Easy setup).
Preparation
To display the picture, turn on your TV and change its video input mode
(e.g. VIDEO 1, AV 1, etc.) to suit the connection to this unit.
≥ When you press [< OPEN/CLOSE]2 to close the disc tray, this unit
automatically starts playing the disc in the tray.
[MP3] [JPEG] [DivX]
– Only the contents in the current group will be played.
– If there are MP3, JPEG and DivX contents in the current group, only one
content type will be played. (Priority: MP3 # JPEG # DivX)
You can select an item of your desired content type to start play.
(B 12, Using navigation menu)
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED.
Press [∫ STOP]5 when you finish to preserve the unit’s motor and your TV
screen.
≥ Total title number may not be displayed properly on iR/iRW.
Selecting sound mode
1 Press [SOUND]: to select a sound mode.
Each time you press the button:
EQ:
Equaliser
SUBW LVL: Subwoofer Level
C.FOCUS: Center Focus (Only when “Surround layout
(Recommended)” mode is selected in “Speaker
layout” (B 8, Easy setup).)
2 While the selected mode is displayed, press [2, 1]8 to
make the settings.
Refer to the following for setting details of each sound effect.
EQ (Equaliser)
You can select sound quality settings.
Each time you press [2, 1]8:
FLAT: Cancel (no effect is added).
HEAVY: Adds punch to rock.
CLEAR: Clarifies higher sounds.
SOFT:
For background music.
SUBW LVL (Subwoofer level)
You can adjust the amount of bass. The unit automatically selects
the most suitable setting according to the type of playback
source.
LEVEL 1
,# LEVEL 2 ,# LEVEL 3 ,# LEVEL 4
^-------------------------------------------------------------------J
≥ The setting you make is retained and recalled every time you
play the same type of source.
C.FOCUS (Center Focus)
(Effective when playing audio containing the center channel
sound or when DOLBY PLII (B 10) is selected.)
You can make the sound of the center speaker seem like it is
coming from within the TV.
ON
,------. OFF
Whisper-mode Surround
Adjusting the speaker level during playback
1 Press and hold [–CH SELECT]: to select the speaker.
While the speaker channel is displayed, press [–CH SELECT]:.
e.g. L # C# R# RS# LS# SW
^---------------------------------------------}
≥ You can adjust SW (Subwoofer) only if the disc includes a
subwoofer channel.
≥ When “S” appears, only the surround speaker channel can be
adjusted. Both surround speaker levels will be adjusted at the same
time.
2 While “C”, “RS”, “LS”, “SW” or “S” is selected
Press [3]8 (increase) or [4]8 (decrease) to adjust the
speaker level for each speaker.
C, RS, LS, SW, S: `6 dB to i6 dB
(L, R: Only the balance is adjustable.) (B below)
Adjusting the speaker balance during playback
1 Press and hold [–CH SELECT]: to select “L” or “R”.
2 While “L” or “R” is selected
Press [2, 1]8 to adjust the speaker balance.
Basic play
1 Press [Í]1 to turn on the unit.
2 Press [DVD]4 to select “DVD/CD”.
3 Press [< OPEN/CLOSE]2 to open the disc tray.
4 Load the disc.
≥ Load double-sided discs so the label for the
side you want to play is facing up.
5 Press [1 PLAY]5 to start play.
≥ Press [r, VOL, s]= to adjust the volume.
Basic controls
One touch play: [1 PLAY]5
(during standby mode)
The main unit automatically turns on and starts playing the disc in the
tray.
Stop: [∫ STOP]5
The position is memorised while “RESUME” is on the main unit’s display.
[DVD-V] [VCD] [CD] [MP3] [DivX] This unit can memorise the resume
position for the last 5 discs.
≥ Press [1 PLAY]5 to resume.
– For the power failure resume, refer to page 7.
≥ Press [∫ STOP]5 again to clear the position.
Pause: [; PAUSE]5
≥ Press [1 PLAY]5 to restart play.
Skip: [SKIP:, SKIP 9]5
Search: [SEARCH6, SEARCH5]5 (during play)
Slow-motion: [SEARCH6, SEARCH5]5 (during pause)
≥ Search: Up to 4 steps
Slow-motion: Up to 3 steps
≥ Press [1 PLAY]5 to start normal play.
≥ [VCD] [DivX] Slow-motion: Forward direction only.
Frame-by-frame (during pause)
[DVD-V] : [
2;, ;1]8
[DVD-V] [VCD] [DivX] : [ ; PAUSE]5 (forward direction only)
On-screen item select: [3, 4, 2, 1, OK]8
[3, 4, 2, 1]8: Select
[OK]8: Confirm
Enter number: Numbered buttons
[DVD-V] [VCD] [CD]
e.g. To select 12: [S10]2 B [1] B [2]
Label facing up
11
SC-XH10 EP_RQTX1309-Z_eng.book Page 11 Friday, March 4, 2011 5:55 PM