Panasonic ESWD10 User Manual
Page 8
English
2
2. Clean the epilation head [
D
]
with the cleaning brush [
G
].
Wet cleaning
1. Lift the fast/gentle cap upward while holding the cap
release rib [
BC
3
].
2-4
2. Apply liquid hand soap to
the discs.
3. Turn the switch on and
then wet the discs to
create foam.
4. Wash the head with water
to wash out hair.
Do not use hot water.
If soap is not completely washed away, then a white
deposit can accumulate and prevent the discs from
moving smoothly.
5. Turn the switch off, wipe the appliance with a dry cloth
and dry it well.
•
•
Removing the built‑in rechargeable battery
Remove the built-in battery when disposing of the epilator.
Perform steps
1
to
7
to disassemble the epilator using a
screwdriver.
Unplug the charger from the epilator before disassembling it.
Press the OFF/ON switch to turn on the power and then keep
the power on until the battery is completely discharged.
Please take care not to short-circuit the battery.
For environmental protection and recycling of materials
This epilator contains a Li-ion battery.
Please make sure that the battery is disposed of at an officially
assigned location, if there is one in your country.
•
•
•