Airlink101 AKVM-2A - Manual (Page 2)

Command
Quick Reference Chart
Select PC
Hotkeys Front-Panel Button Description
ScrLk + ScrLk + (x) Select the active PC channel
Next lower channel ScrLk + ScrLk + (up arrow) Select the lower channel
Next higher channel ScrLk + ScrLk + (down arrow)
Press the push button to
rotate through the channel
Select the higher channel
Bind PC & Audio switching
Reset KVM
Autoscan
Stop Autoscan
ScrLk + ScrLk + End
ScrLk + ScrLk + S
Any key on keyboard
Reset the KVM Switch
Autoscan through every connected channel
Terminate Autoscan activity
1
1 Note (x) = 1 or 2
Select Audio channel ScrLk + ScrLk + (Fx)
(Fx is a function key)
2
Select the active Audio channel
Unbind PC & Audio switching
ScrLk + ScrLk + Q
ScrLk + ScrLk + W
Enable the binding of PC port and Audio
port switching (factory default)
Disable the binding of PC port and Audio
port switching (once unbound, PC and
Audio switching becomes independent)
2 Note (Fx) = F1 or F2
Press the front-panel button
Hotkey convention: The hotkey notation “ScrLk + ScrLk + Key”, denotes that you should hit the individual key consecutively one at a time, not simultaneously.
Mouse troubleshooting on a non-PnP OS (Linux, NT4.0): If you experience mouse lock when hot-plugging mouse on a non-PnP OS such as Linux or WinNT4.0, just
hit one of the following hotkey commands for mouse reset
ScrLk + ScrLk + M + 1 for a 2-key mouse setting; ScrLk + ScrLk + M + 2 for a 3-key wheel mouse setting; ScrLk + ScrLk + M + 3 for a 5-key wheel mouse setting