Albatron Technology PX865PEC - Manual (Page 5)

Chapter 1. Getting Started
Introduction
Thanks for choosing the PX865PEC PRO(2.0) mainboard! It is based on the 865PE Northbridge
chipset and the ICH5 Southbridge chipset. It supports Intel
®
Pentium
®
4 (Northwood/ Prescott)
Processors with FSB (Front Side Bus) 800/533/400 MHz.
The PX865PEC PRO(2.0) mainboard provides 4 sockets using 184-pin DDR SDRAM with a total
capacity of up to 4GB. You can install unbuffered & non-ECC DDR400/ 333/ 266 (PC3200/ 2700/
2100) SDRAM.
The PX865PEC PRO(2.0) mainboard provides one x8 AGP Slot with AGP 3.0 specification and five
32-bit PCI Slots.
The PX865PEC PRO(2.0) mainboard includes two built-in IDE facilities that support Ultra ATA
33/66/100 BMIDE and PIO Modes. It also includes two built-in Serial ATA facilities that support a
transfer rate to 150 Mbps.
The PX865PEC PRO(2.0) mainboard comes with an AC’97 Sound Codec (ALC655) which supports
high quality 6 channels audio function (Super 5.1 Channel Audio Effect). It also supports Sony/
Philips Digital Interface (S/PDIF) function (SPDIF-OUT function is onboard, but SPDIF-IN function
is an optional facility).
The PX865PEC PRO(2.0) mainboard also supports to set maximal eight USB 2.0 ports.
Moreover, the PX865PEC PRO(2.0) mainboard comes with a LAN chip which provides the back
panel LAN port capable with 10/ 100 Mbps transfer rate.
All of the information in this manual only for reference. This specification is subject to change
without notice.
1