Panasonic ESLF51 - Manual (Page 4)

4
English
Using the lock ring
Use the lock ring to lock or unlock the power switch.
Rotate the lock ring until it clicks.
Rotate the lock ring to “ ” to unlock the power
switch:
For when shaving, washing the shaver, lubricating
the shaver.
Rotate the lock ring to “ ” to lock the power
switch:
For when carrying the shaver.
Charge
Charging the shaver
1 1
Insert the appliance plug into the
shaver.
2 2
Plug in the AC adaptor into a
household outlet.
Turn the shaver off before attaching.
Charging is completed after approx. 1 hour.
You cannot operate the shaver while charging.
•
•
Reading lamps when charging
While charging After charging is completed
The charge status lamp ( ) glows.
The number of the battery
capacity lamp will increase as
charging progresses.
All the lamps will light up and
then turn off after 5 seconds.
After charging is completed, turning the power switch ON with
the shaver plugged in will cause all the lamps to light up and then
turn off after 5 seconds. This shows that the shaver is fully
charged.
Recommended ambient temperature for charging is 5‑5 °C. The
battery may not charge properly or at all under extreme low or
high temperatures.
The charge status lamp ( ) will blink when there is a problem
with charging.
When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charge status lamp ( )
may not glow. It will eventually glow if kept connected. •
•
•
ES-LF51_EU.indb 4 2011/03/03 16:21:04