Panasonic SCAKX52EG - Manual (Page 5)

TO SB-AKX52 TO SB-AKX52
R
L
(5 :)
HIGH
(4 :)
LOW
(5 :)
HIGH
(4 :)
LOW
SPEAKERS
RQTX1298
5
5
E
N
G
L
IS
H
ENGL
ISH
Connect the AC mains lead only after all the other connections have been made.
Conserving power
The system consumes approximately 0.3 W when it is in standby mode. Disconnect the power supply if you do not use the system. Some settings
will be lost after you disconnect the system. You have to set them again.
Making the connections
Connect the speakers
FM indoor antenna
Adhesive tape
AM loop antenna
Connect the antennas
Place the antenna where reception is best.
Refer to “Using the auxiliary input”
(Z 13) for more information on AUX
connection.
Connect the AC mains lead
Use the included AC mains lead with this
system only.
Do not use an AC mains lead from other
equipment.
To household mains socket
Click!
SC-AKX52_EG_en.indd 5 SC-AKX52_EG_en.indd 5 3/4/2011 2:12:51 PM 3/4/2011 2:12:51 PM