Atlantis Land A02-RB-W54_GE01 - Manual (Page 7)

Wireless Broadband Router
7
100Mbps.
LAN(3)
Connect an UTP Ethernet cable to
one of the four LAN ports when
connecting to a PC or an
office/home network of 10Mbps or
100Mbps.
Reverse SMA(4)
There is one 2dBi Gain Antenna
in the rear panel for wireless
connection.
Reset(5)
After the device has turned on,
press it to reset the device or
restore to factory default settings.
Use a pin-shape item to push to
reset this device to factory default
settings. It will be useful too when
the manager forgot the password
to login, but the setting will be
back to default setting.
1.4 Cabling
Plug in one end of the network cable to the WAN port of the
Wireless Internet Broadband Router.
Plug in the other end of the network cable to the Ethernet
port of the xDSL or Cable modem (E.G A02-RA141 or A02-
RA111).
Use another network cable to connect to the Ethernet card
on the computer system; the other end of the cable connects
to the LAN port of the Internet Broadband Router. Since the
Wireless Broadband Router has four ports, you can connect
up to four computers directly to the unit. There you do not
have to buy a switch to connect these computers since one