Rear gas burner assembly – ADC AD-310 User Manual
Page 69
67
Telephone: (508) 678-9000
Fax: (508) 678-9447
Rear Gas Burner Assembly
Illus. No.
Part No.
Qty.
Description
1
141242
1
5 Port Rear Manifold
2
150309
2
#10-16 x 1/2" Hex Head TEK Crimptite Screw
3
142711
1
1" Close Nipple
4
334085
1
Pipe Bracket
5
140017
1
1" 24 VAC Natural Gas Valve
140018
1
1" 24 VAC Gas Valve L.P. Conversion Kit
6
150309
2
#10-16 x 1/2" Hex Head Crimptite Screw
7
334085
1
Pipe Bracket
8
142724
1
1" x 2" Nipple
9*
140834
5
#5 Burner Orifice (natural gas)
140819
5
#30 Burner Orifice (L.P. [liquid propane])
10
142548
1
1" x 90° Elbow
11
150309
4
#10-16 x 1/2" Hex Head TEK Crimptite Screw
12
334086
1
Manifold Rest
13
150301
10
#8-18 x 7/16" Phillips Pan Head TEK Screw
14
334084
1
Rear Burner Tube Rest
15
--------
1
Sail Switch
(refer to Sail Switch Assembly on page 68)
16
150309
5
#10-16 x 1/2" Hex Head Crimptite Screw
17
141123
5
Burner Tube
18
150309
4
#10-16 x 1/2" Hex Head TEK Crimptite Screw
19
331290
1
Sight Hole Disc
20
150309
1
#10-16 x 1/2" Hex Head TEK Crimptite Screw
21
332597
1
Burner Box Cover Plate
22
150309
1
#10-16 x 1/2" Hex Head TEK Crimptite Screw
23
880943
1
Direct Spark Ignition (DSI) Ignitor/Flame Probe Assembly
(includes HV [high voltage] wire and connector)
305410
1
Ignitor Gap Feeler Gauge ... Not Illustrated
881934
1
High Voltage (HV) Wire with Instrallation Instructions Kit
24
150001
2
#6-32 x 1/2" Phillips Round Head Machine Screw
25
130201
1
330° Manual Hi-Limit Thermostat
(for models mfd. as of May 26, 1998)
130401
1
330° Automatic Hi-Limit Thermostat
(for models mfd. prior to May 26, 1998)
26
881516
1
Rear Burner Box ONLY
881519**
1
Natural Gas Rear Burner Box Assembly Complete Less Orifices
(includes illus. nos. 1 through 8 and 10 through 30)
881520**
1
L.P. Gas Rear Burner Box Assembly Complete Less Orifices
(includes illus. nos. 1 through 8 and 10 through 30)
27
151000
2
#6-32 Pal Nut
28
826021
1
Hi-Limit Mounting Bracket
29
150309
7
#10-16 x 1/2" Hex Head TEK Crimptite Screw
30
334226
1
Burner Baffle
881011
-
ADG-310 DSI L.P. Conversion Kit (includes orifices)
*
Consult factory for elevations over 2,000 feet.
** Orifices are not included and must be ordered separately.