Panasonic KXTG7732 - Manual (Page 17)

Initial settings
n Direct command code:
Programmable settings can be accessed by
pressing
M MENU N , # and then the
corresponding code on the dial keypad
(page 33).
Example: Press M MENU N#101 .
n Symbol meaning:
Symbol Meaning
Example:
MbN : “ Off ”
Press MCN or MDN to select
the words in quotations.
Date and time
Important:
R When you install the batteries for the first
time, the handset may prompt you to set
date and time. First press
M SELECT N , then
proceed to step 2.
1
M MENU N#101
2
Enter the current month, date, and year
by selecting 2 digits for each.
Example: July 15, 2012
07 15 12
3
M OK N
4
Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
09 30
5
M AM/PM N : Select “ AM ” or “ PM ” .
6
M SAVE N a M OFF N
Note:
R When English is selected as the display
language, 12-hour clock format is used.
When Spanish is selected, 24-hour clock
format is used.
R The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Display language
You can select either “ English ” or
“ Español ” as the display language. The
default setting is “ English ” .
1 M MENU N#110
2
MbN : Select the desired setting. a
M SAVE N
3
M OFF N
Voice guidance language
You can select either “ English ” or
“ Español ” as the voice guidance language
of the answering system. The default setting is
“ English ” .
1
M MENU N#112
2
MbN : Select the desired setting. a
M SAVE N
3
M OFF N
Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is
“ Tone ” .
“ Tone ” : For tone dial service.
“ Pulse ” : For rotary/pulse dial service.
1
M MENU N#120
2
MbN : Select the desired setting.
3
M SAVE N a M OFF N
For assistance, please visit http://www.panasonic.com/help 17
Getting Started