Installing usbcontrol, Plugging in your devices – Adaptec FireConnect For Notebooks User Manual
Page 17
8
XHub for Notebooks User’s Guide
Installing USBControl
USBControl is a software utility that helps you easily manage your
USB peripherals. Using USBControl, you can find information on
device performance and status, and get detailed device
information and troubleshooting help.
To install USBControl, insert the XHub for Notebooks CD into your
CD-ROM and follow the on-screen instructions.
Note:
USBControl runs with Adaptec USB 2.0 controllers, and
on Windows OSs only.
Plugging in Your Devices
Follow the picture below to connect your USB 1.1 and 2.0 devices
to your XHub for Notebooks. You can plug devices into any of the
four USB ports.
Note:
USB 1.1 devices won’t operate at USB 2.0 speeds, even if
they’re connected to USB 2.0 hubs or controllers. Your XHub
must be connected to a USB 2.0 port for it and your USB 2.0
devices to operate at USB 2.0 speeds. (See
for more information, and
for special limitations for Macintosh users.)
USB Device Cable
into USB Port
1
2
3
4
USB device cable
XHub for Notebooks UG Book.book Page 8 Wednesday, July 17, 2002 3:48 PM