AEG Lavamat 48580 - Manual (Page 12)

User information
12
LINEN/EASY CARES 12.45
Cycle end at 14.37
50°C
1000
Switching on the appliance/Selecting a programme
Select the programme using the
programme knob, e.g., LINEN
/EASY CARES .
By selecting a programme, you
switch the appliance on at the
same time.
–
The display lights up and shows
the programme set, the current
time and the estimated end of
the cycle.
–
Depending on the programme, the washing machine suggests a
temperature and a spin speed. You can change these suggestions.
–
The lighting for the display switches itself off at the end of the cycle
or, if the appliance is not started after the programme is set, after 10
minutes. To switch the light on again, press any key or turn the
programme knob.
Changing the temperature
Press the TEMP. key
repeatedly until the desired
temperature is displayed.
Changing spin speed / Selecting rinse hold
Press the RPM key
repeatedly, until the desired spin
speed or
RINSE HOLD is
displayed.
• With spin speed «0» the last
rinse water is drained off at
the end of the cycle, but the
washing is not spun.
• With RINSE HOLD the washing is left to soak in the last rinse
water. There is no final spin after the intermediate spin(s).
Intermediate spins are programme-dependent and cannot be
altered.
LINEN/EASY CARES 12.45
Cycle end at 14.37
50°C
1000