About leds, About leds about icons – Avaya ONE-X 1608 User Manual

Page 9

Advertising
background image

Name

Description

Mute

Press the Mute button to mute a call in progress. To take a call off
mute, press Mute again.

Speaker

Press the Speaker button to use the speakerphone. To take a call
off speakerphone, lift the handset or press the Headset button.

Call/Line
Appearance
Buttons and
Feature Buttons

There are 8 buttons that can be programmed as either call/line
appearance buttons or feature buttons. Press a call/line appearance
button to make or answer a call or resume a call on hold. Press a
labeled feature button to enable or disable that feature. The feature
buttons provide access to the Avaya call management system
features that have been administered for your extension. The green
LED next to each feature button indicates if the feature is currently
on or off. If the light is on, the feature is on. The feature buttons
provide the same features that are available in the features menu.
For more information about the features menu, see

About the

Features Menu

. For more information about the feature buttons, see

About Advanced Telephone Features

.

About LEDs

Each call/line appearance button and feature button has two LEDs, one green and one

red, to indicate the status of the call/line appearance or feature. The status is identified by

whether the LED is turned on, off, or blinking as described in the following tables.

Table 1. Call/Line Appearance Button LEDs

LED

Description

Steady green

Call/line appearance is active.

Slow blinking green Call/line appearance is ringing.

Fast blinking green

Call/line appearance is on hold.

Very fast blinking
green

Conference or Transfer is pending.

Steady red

Call/line appearance is selected and will be used when you go off-
hook. It remains steady red while you use the call/line appearance.

Off

Call/line appearance is available.

Table 2. Feature Button LEDs

LED

Description

Steady green

Feature is active.

Blinking green

Feature is pending (request is being processed and not
immediately available).

Blinking red

Feature is shown on the phone display.

Off

Feature is not active.

Note:
Depending on your call processing system, the feature button LEDs for some features

may operate differently.

Introduction to the 1608 IP Telephone

Issue 1 July 2007 9

Advertising