Air Comm Systems Six Passenger ICS/Transmit Expansion Unit ACS 179A - Manual (Page 4)

Air Comm Systems, Inc. Page 4
Physical Installation
The ACS 179A is designed to be Dzus or remote mounted and should be installed in the
aircraft using the ACS 179A Installation kit that was included with the unit. The above outline
drawing of the unit with dimensions will facilitate the installation. The ACS 179A Installation Kit
consists of the following:
Two (2) 25 pin AMP D-Subminiature female mating connector complete with crimp pins, hood,
and slidelock.
The connector pin configuration of the ACS 179A rear connector and the recommended wire
size for the aircraft cable harness is shown on the following page.
n
Physical Dimension Outline
ACS 179A Installation and Operations Manual
Physical Dimensions