Panasonic KXTG7623 User Manual
Page 56
Answering landline calls with your
headset
To answer a landline call, turn on your
headset referring to your headset
operating instructions.
When you finish talking, turn off your
headset referring to your headset
operating instructions.
Note:
R If you cannot hang up the call using
your headset;
– press MnN (STOP) on the base unit.
(KX-TG7621 series: page 3)
– press MSP-PHONEN on the base
unit 2 times. (KX-TG7641 series:
page 3)
Switching between the base unit and
your headset
You can switch between the base unit
and your headset:
– during a landline call with the base
unit speakerphone. (KX-TG7641
series: page 3)
– during an intercom call between the
base unit and handset. (KX-TG7641
series: page 3)
– while listening to messages recorded
on the base unit answering system.
n
KX-TG7641 series: page 3
To switch to your headset:
Press MHEADSETN on the base unit.
To switch to the base unit:
Press MSP-PHONEN on the base unit.
*1 KX-TG7621 series: page 3
R You can only switch from the
base unit to your headset. Turn
on the headset referring to your
headset operating instructions.
Call sharing between your headset
and the handset
Important:
R To activate this feature, you should
set call sharing mode to on
beforehand (page 44).
n
While the handset is on a landline
call:
To join the conversation with your
headset, turn on the headset
referring to your headset operating
instructions.
n
While your headset is on a landline
call:
To join the conversation with the
handset, press M
N.
Adjusting your headset receiver
volume
Base unit
n
KX-TG7621 series: page 3
Press MjN or MkN repeatedly while
using your headset.
n
KX-TG7641 series: page 3
Press MDN or MCN repeatedly while
using your headset.
56
For assistance, please visit http://www.panasonic.com/help
Using Bluetooth Devices