Panasonic EW-BW30S - Manual (Page 26)

25 English
Irregular Pulse Function
If the pulse rate varies by more than ±25 % from the average while a
measurement is being taken, when measurement is completed the
mark will be displayed.
The mark will lit after approximately 6 seconds of blinking when the
measurement is completed.
If the
mark is lit, please take the measurement again.
In some cases, if the pulse rate fluctuates greatly while a measurement
is being taken, it may be impossible to obtain an accurate reading.
If you save a reading where an irregular pulse was recorded, the
mark will be displayed when you recall that reading.
Even if the mark is displayed, this doesn’t mean whether or not the
pulse is, in fact, irregular.
* This function is designed to act as a guide to help you to obtain
accurate readings (please see page 14).
Even if the
mark is not displayed, we recommend that you take
measurements 2–3 times at rest.
* If the mark is frequently displayed, please consult a health
professional for your health condition.
Don’t try to interpret readings or attempt to treat any condition
yourself.
Always follow the guidance of a health professional.
•
•
•
•