Panasonic DMC-FZ1000 User Manual
Page 258
12.
Using the Wi-Fi function
258
∫
Changing the connection method
To change the connection method, press [DISP.], and then select the connection method.
When connecting with [Via Network]:
1
Select [Via Network].
•
Follow the connection procedure described on
to connect the camera to a wireless
access point.
2
Turn on the Wi-Fi function.
3
Connect the smartphone to the wireless access point to which the camera is
connected.
4
Start “Image App”.
When connecting with [WPS Connection]
¢
in [Direct]:
1
Select [Direct].
•
Follow the connection procedure described on
to connect the camera to the
smartphone.
2
Start “Image App”.
¢ WPS is a function that allows you to easily set up a connection with a wireless LAN device
and make security-related settings. To check whether your smartphone supports the
function, refer to the operating instructions of the smartphone.
∫
Terminating the connection
After use, terminate the connection to the smartphone.
1
2
On the smartphone, close “Image App”.
On the camera
On your smartphone/tablet
On the camera
On your smartphone/tablet
(If you are using an iOS device)
On the screen of “ Image App”, press the home button to close the app.
(If you are using an Android device)
On the screen of “ Image App”, press the return button twice to close the app.