Panasonic ES-LT71-S - Manual (Page 11)

11

English
Cleaningtheshaverwithouttheself‑cleaningrecharger
1. Disconnect the power cord from the
shaver.
. Apply some hand soap and some water
to the outer foil.
3. Rotate the lock ring to unlock the power
switch.
4. Press the power switch for more than 
seconds to activate the sonic vibration
cleaning mode.
The battery capacity lamps blink in
order.
After about 0 seconds, it will be
automatically turned off, or you can
turn it off by pressing the power
switch.
5. Remove the outer foil section and press
the power switch for more than 
seconds to activate the sonic vibration
cleaning mode and clean it with running
water.
6. Wipe off any drops of water with a dry
cloth.
7. Dry the outer foil section and the shaver
completely.
8. Attach the outer foil section to the
shaver.
•
•
4
5
7
Dryingtheshaverwiththeself‑cleaningrecharger
1. Attach the outer foil section to the shaver.
. Dry the shaver with self‑cleaning recharger using “Dry/
Charge” course.
Replacingthesystemouterfoilandtheinnerblades
system outer foil once every year
inner blades once every two years
Replacingthesystemouterfoil
1. Press the foil frame release buttons and lift
the outer foil section upwards.
. Press the system outer foil release buttons
and pull down the system outer foil.
3. Align the foil frame mark ( ) and the system
outer foil mark ( ) and securely attach
together.
The system outer foil cannot be reversely
attached.
Always insert the system outer foil to the foil
frame when attaching to the shaver.
4. After turning the foil frame mark ( ) to the
front, securely attach the outer foil section to
the shaver until it clicks.
•
•
1
2 3
Replacingtheinnerblades
1. Press the foil frame release buttons and lift
the outer foil section upwards.
. Remove the inner blades one at a time.
Do not touch the edges (metal parts) of the
inner blades to prevent injury to your hand.
3. Insert the inner blades one at a time until they
click.
•
1
2 3

