Panasonic KX-TGA101S - Manual (Page 4)

4 For assistance, please visit http://www.panasonic.com/help
Panasonic battery performance
Note:
L
The handset can be left on the
charger without any ill effect on the
batteries.
L
The battery level may not be
displayed correctly or the entire
display may go blank after you
replace the batteries. In this case,
place the handset on the charger and
let charge for 7 hours.
Registration
Register the handset to a KX-TG1032/
KX-TG1033/KX-TG1034/KX-TG1035
base unit.
1 Base unit:
Press and hold {LOCATOR} until
the registration tone sounds.
L
If all registered handsets start
ringing, press {LOCATOR} to
stop, then repeat this step.
L After the base unit beeps, the rest
of the procedure must be
completed within 1 minute and 30
seconds.
2 Handset:
Press {OK}, then wait until a beep
sounds and w stops flashing.
Changing the display
language
1
{
MENU}
2
{V} /{^}: “Handset settings” i
{ OK}
3
{V} /{^}: “Display settings” i
{ OK}
4
{V} /{^}: “Change language” i
{ OK}
5
{V}
/{^}: Select the desired setting.
6
{ OK} i {OFF}
Belt clip
You can hang the handset on your belt
or pocket using the included belt clip.
To attach the belt clip
To remove the belt clip
While pressing the top of the clip(
A),
pull the right edge in the direction of the
arrow (
B).
Operation Operating time
While in use
(talking) Up to 17 hours
While not in use
(standby) Up to 7.5 days
A
B
TGA101(e).fm Page 4 Thursday, December 28, 2006 8:09 PM