Clean cleaningtheshaver, Readingthelcdpanelwhenusing – Panasonic ES-LT41-K User Manual

Page 6

Advertising
background image

6

English

Pivotactionselector

Use to select “SOFT” (soft) or “LOCK”
(lock).
You can change the pivot action whether
the shaver is turned on or off.

Usingthetrimmer

Slide the trimmer handle up. Place at
a right angle to your skin and move
downwards to trim your sideburns.

ReadingtheLCDpanelwhenusing

While using

When the battery capacity is

low

Approximate amount of

battery charge is displayed as

0 ‑ 100 (%).

“10%” appears and the charge

status indicator (

) blinks

when pressing the power

switch.

You can shave 1 to  times
after “10%” appears. (This
will differ depending on
usage.)

A full charge will supply enough power for approx. 14 shaves of 3
minutes each.

Clean

Cleaningtheshaver

We recommend that you clean your
shaver with the sonic vibration cleaning
mode when the clean indicator (

)

appears on the LCD panel.
1. Disconnect the power cord from the

shaver.

. Apply some hand soap and some water

to the outer foil.

3. Rotate the lock ring to unlock the power

switch.

4. Press the power switch for more than 

seconds to activate the sonic vibration
cleaning mode.

The sonic vibration indicator (

)

appears on the LCD panel.
After about 0 seconds, it will be
automatically turned off, or you can
turn it off by pressing the power
switch.

5. Remove the outer foil section and press

the power switch for more than 
seconds to activate the sonic vibration
cleaning mode and clean it with running
water.

6. Wipe off any drops of water with a dry

cloth.

7. Dry the outer foil section and the shaver

completely.

8. Attach the outer foil section to the

shaver.

4

5

7

Advertising