Panasonic TC-60AS640U - Manual (Page 119)

- 119 -
Screen settings
MENU Menu > Picture > Screen settings
Screen format
SD signal:
Full → JUST → 4:3 → ZOOM
HD signal:
Full → JUST → 4:3 → ZOOM → H-FILL → SIDECUT JUST →
SIDECUT ZOOM
Changes the format (aspect ratio). Lets you choose the aspect depending on
the format of received signal.
Overscan
(
On/Off)
Selects the screen area displaying the image for FULL aspect.
On:
Enlarges the image to hide the edge of the image.
Off:
Displays the image in the original size.
Set to On if noise is generated on the edge of the screen.
H size
(
Size 1/Size 2)
Adjusts the horizontal display range to reduce noise of both side edges of an
image.
Size 2:
Adjusts the image size according to the aspect mode to reduce noise.
●
Aspect mode: 4:3
– The width will be decreased on both sides to reduce noise.
● Aspect mode: FULL / JUST / SIDECUT JUST / (H-FILL / ZOOM /
SIDECUT ZOOM)
– The width will be increased on both sides to reduce noise.
Zoom adjustments
Adjusts vertical position and size when FORMAT setting is set to
JUST or