Panasonic HX-WA03W - Manual (Page 48)

48
VQT4X05
If the Wi-Fi connection cannot be established
Please refer to the operating instruction of the device in use for details
about the setting of the wireless access point or smartphone.
Problem Check points
It cannot connect
to the wireless
access point.
The wireless
access point is not
detected.
(General)
≥ Turn ON the wireless access point.
≥ Approach the wireless access point and
reconnect.
≥ If it takes time to complete the connection,
the Wi-Fi connection will be aborted.
Reset the connection settings.
≥ Check how to connect to the wireless access
point and how to set the security settings.
≥ Make sure the wireless access point is
registered in this unit.
≥ The device may be unable to locate the
wireless access point due to problems with
the signal. Use [Manual Connection].
≥ The Wi-Fi function will not work underwater.
(Easy Connection)
≥ Make sure the wireless access point is in
the correct WPS standby mode.
≥ Make sure the PIN code has been correctly
input.
(Manual Connection)
≥ Make sure the SSID and password have
been correctly input.
≥ Check the Authentication method,
Encryption type, and Encryption key
(Password).
Radio waves of the
wireless access
point get
disconnected. ≥ The condition may improved by moving the
location or changing the angle of the
wireless access point.
≥ If you use another 2.4 GHz band device such as
a microwave oven or cordless telephone nearby,
you may interrupt the signal. Keep a sufficient
distance from these types of devices.
HX-WA30&WA3&WA03_PP&PU-VQT4X05_mst.book 48 ページ ２０１３年１月１６日 水曜日 午後５時２９分