Setting up the system, Firmware updates, Precautions – Panasonic SC-XH105 User Manual

Page 7

Advertising
background image

7

VQT5J81

G

e

tti

n

g

started

Setting up the system

Follow the “Owner’s Manual <Setup>” to set up
the system first.

Speakers

≥ Keep your speakers at least 10 mm (

13

/

32

z) away

from the system for proper ventilation.

≥ For optional wall mount, refer to page 15.
≥ When you place all the speakers in a row at the

front, set “5.1ch Front Layout” to “On”. (

> 14)

Center speaker
≥ Put it on a rack or shelf not to interfere with the

TV’s various sensors (ambient light, etc.).
Vibration caused by the speaker can disrupt the
picture if it is placed directly on the TV.

Surround speakers
≥ Place the speakers at the same height or higher

than ear level.

HDMI

≥ Use the ARC* compatible High Speed HDMI

cables. Non-HDMI-compliant cables cannot be
utilized.
It is recommended that you use Panasonic’s
HDMI cable. When outputting 1080p signal,
please use HDMI cables 5.0 meters (16.4 ft.) or
less.

* ARC is an abbreviation of Audio Return Channel, also

known as HDMI ARC. This feature allows a home theater
system to receive and play audio from the TV through a
single HDMI cable without additional wiring.

VIDEO OUT

Do not make the video connections through

the VCR.
Due to copy guard protection, the picture may
not display properly.

AC power supply cord

≥ This unit consumes a small amount of AC

power (

> 18) even when turned off in standby

mode. For the purpose of energy conservation,
the unit should be disconnected if you will not
be using it for extended period of time.

Firmware updates

Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.

You can download the latest firmware from the
following website and burn it to a CD-R to update
the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)

DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
is in process.
After the firmware is installed, “donE” will be
displayed on the unit’s display.

Precautions

SC-XH105P-VQT5J81_mst.book 7 ページ 2014年3月20日 木曜日 午前11時5分

Advertising