Panasonic MC-GG529 - Manual (Page 34)

- 34 -
Thermal Protector
➢ If a clog prevents the normal flow of air to the motor, the thermal protector turns the
motor off automatically to allow the motor to cool in order to prevent possible
damage to the vacuum cleaner.
➢ To correct problem, turn off and unplug vacuum cleaner, remove clogs, and/or
clean/replace filters.
➢ Replace full bag if necessary.
➢ Wait approximately thirty (30) minutes, plug vacuum cleaner in, and turn on to see if
thermal protector has reset. Thermal protector will not reset if vacuum cleaner is not
turned off even if vacuum cleaner cools down.