Panasonic SC-HTB8 - Manual (Page 9)

Getting started
VQT5J41 9
By using the Bluetooth ® connection, you can listen to the sound from your Bluetooth ® audio device to this
system wirelessly.
≥ Refer to the operating instructions of the Bluetooth ® device for further instruction on how to connect a Bluetooth ® device.
Preparation
≥Turn on the Bluetooth ® feature of your device and place your device near the main unit.
Press [ ] to select “ ”.
≥ If the “ ” indicator flashes quickly, go to step 3.
Press and hold [ ] until the “ ” indicator flashes quickly.
≥ If the “ ” indicator flashes slowly, repeat step 2.
Select “SC-HTB8” from the Bluetooth ® menu of your device.
≥ If prompted for the passkey on the Bluetooth ® device, enter “0000”.
≥ Once the Bluetooth ® device is connected, the “ ” indicator stops flashing and lights up.
≥ You can register 8 or more Bluetooth ® devices to this unit.
However, when this unit is turned off, it can store only up to 8 registered devices. If you register 9 or more devices,
devices with the oldest connection history will be deleted.
Press [ ] to select “ ”.
≥ If the “ ” indicator lights, a Bluetooth ® device is already connected with this system. Disconnect it. (> below)
Select “SC-HTB8” from the Bluetooth ® menu of your device.
∫ Disconnecting a Bluetooth ® device
Press and hold [ ] until the “ ” indicator flashes slowly.
≥ When “ ” is selected as the source, this system will automatically try and connect to the last connected Bluetooth ® device.
If the connection attempt fails, try to establish a connection again.
≥ The Bluetooth ® device will be disconnected if a different audio source (e.g. “TV”) is selected.
≥ This system can only be connected to one device at a time.
Bluetooth ® connection
Bluetooth ® pairing
Connecting a paired Bluetooth ® device
SC-HTB8P_VQT5J41_P.book 9 ページ ２０１４年３月２４日 月曜日 午前１０時３５分