Panasonic ER-GS60-S - Manual (Page 14)

14
English
5. Brush any hair trimmings out from
between the stationary blade and
the moving blade while pressing
down the cleaning lever to raise the
moving blade.
6. Apply the oil to the blade.
7. Attach the comb attachment and blade to the clipper.
Lubrication
Apply the oil to the clipper before
and after each use.
Apply a drop of the oil to the
points indicated by the arrows.
Remountingtheblade
Fit the mounting hook into the
blade mounting on the clipper
and then push in until you
hear a click.
Troubleshooting
Problem Action
The clipper has become
blunt.
Replace the blade.
(See pages 13 and 14.)
Clean the blade and apply oil.
(See pages 13 and 14.)
Charge the clipper.
(See page 9.)
Clipper stopped
functioning.
Few uses remain.
Charge the battery for
approximately 30 hours
continuously to rejuvenate it.
If few uses remain even after
charging, the battery has reached
the end of its life. (Fluid may be
leaking due to degradation at the
end of battery life.)
Contact an authorized service
center for repair.
The clipper cannot be
charged.
Push the main body into the AC
adaptor all the way and make sure
the charge status lamp glows.
Gently wipe the side terminals
and the charging terminals of AC
adaptor with a cloth or tissue
damped with water.
Charge within the recommended
charging temperature of 0 °C
(32 °F) to 35 °C (95 °F).