Panasonic SC-NE3 - Manual (Page 5)

5
VQT4U49
ENGLISH
Control reference guide
1 Standby/on switch [Í/I] ([Í])
Press to switch the unit from on to standby mode or vice
versa.
In standby mode, the unit is still consuming a small amount
of power.
2 Enter sound menu
3 Enter setup menu
4 Select Bluetooth ® /AUX
5 Adjust the volume (0 (min) to 50 (max))
6 Enter the Bluetooth ® menu/
Change the sound input level of the external
device (l 6)/
Select the playback mode for AirPlay (l 11)
7 Mute the sound
Mutes the sound. Press again to cancel.
“MUTE” is also canceled when the volume is adjusted or the
unit is turned off.
8 Selection/OK
9 WPS pairing button (l 8)
10 Display
11 Remote control signal sensor
Distance: Within approx. 7 m (23 ft) directly in front.
≥ To avoid interference, please do not put any objects in
front of signal sensor.
12 Wi-Fi ® status indicator
∫ Before using for the first time
Remove the insulation sheet A.
∫ To replace a button-type battery
Battery type: CR2025 (Lithium battery)
1 2
≥ Set the button-type battery with its (i) mark
facing upward.
≥ Keep the button-type battery out of reach of
children to prevent swallowing.
− VOLUME ＋
1 4 9 5
10 11
12
Top view
SOUND
SETUP PLAY MENU
OK  
1
4
2
5
6
7
8
3
SC-NE3_PPC~VQT4U49.book 5 ページ ２０１３年１月２８日 月曜日 午後４時２９分