Panasonic ES-LT33-S - Manual (Page 13)

13

English
Troubleshooting
Problem Action
The power switch cannot
be pressed.
Unlock the power switch.
Trimmed hairs fly all over.
This can be improved by cleaning
every time after shaving.
System outer foil gets hot.
Replace the system outer foil if it
is damaged or deformed.
(See page 12.)
The blades do not dry.
The blades may not dry quickly
due to temperature conditions.
The blades can be dried more
easily by removing for drying.
The odor is getting
stronger. This can be improved by cleaning
every time after shaving.
You do not get as close a
shave as before.
This can be improved by cleaning
every time after shaving.
Replace the system outer foil and/
or inner blades.
Expected life of system outer foil
and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
Makes a loud sound.
Confirm that the blades are
properly attached.
The shaver makes a high‑pitched
sound due to the linear motor drive.
This does not indicate a problem.
Problem Action
The shaver cannot be
charged.
The recommended temperature
for charging is 10 – 35 °C
(50 – 95 °F). If charged at a
temperature other than the
recommended temperature, the
shaver may take longer to charge
or may not charge at all.
Operating time is short
even after charging.
When the number of operations
per charge starts to decrease, the
battery is nearing the end of its life.
Shaver stopped
functioning.
Recommended ambient
temperature for operation is
5 – 35 °C (41 – 95 °F). The
shaver may stop functioning when
out of recommended ambient
temperature range.
The battery has reached the end
of its life.
If the problems still cannot be solved, contact the store where you
purchased the unit or a service center authorized by Panasonic for
repair.