Panasonic MC-UG725 - Manual (Page 16)

- 16 -
Tool Storage
➢ Place wand in center slot of tool
holder, twisting and pushing down
over short hose to assure a good
connection.
➢ Place crevice tool into rectangular
rear slot of tool holder.
➢ Refer to PARTS IDENTIFICATION
section for tool location.
Dusting Brush
Brosse à épousseter
Cepillo para sacudir
Crevice Tool
Suceur plat
Herramienta
para hendiduras
Short Hose
Manguera
corta
Tuyau court
Wand
Tube
Tubo
Telescopic Wand
Tubo telescópico
Tube télescopique
Hose Holder
Soporte para
la Manguera
Porte-tuyau
“J" Slot
Fente en “J”
Ranura en "J” Raised Tab
Saillie
Lengüeta
levantada
Wand
Tube
Tubo
Hose
Tuyau
Manguera
➢ Place hose in front of handle on
hose holder.
➢ Attach wand to hose by aligning the
two (2) raised tabs on wand with “J”
slots in hose, guide tabs along
grooves, twist to lock in place.