Remote control – Panasonic SC-HTB580 User Manual
Page 8
8
RQT9922
1
Turn the main unit on or off (> p. 21)
2
Select the input source (> p. 21)
“TV”
--# “BD/DVD” --# “BLUETOOTH”
^--------------------------------------------------------}
3
Select the setup menu (> p. 24)
4
Select the sound menu (> p. 22)
5
Select the Bluetooth
®
device as the source
(> p. 21)
6
Adjust the volume of this system (> p. 21)
7
Mute the sound (> p. 21)
8
Select and confirm the option
∫ About remote control signal sensor
The remote control signal sensor is located on the main unit.
≥Use the remote control within the correct operation range.
Distance: Within approx. 7 m (23 ft) directly in front
Angle: Approx. 30
o
left and right
B Remote control signal sensor for table top layout
C Remote control signal sensor for wall mounting layout
Remote control
SOUND
1
5
6
7
8
2
INPUT
SETUP
OK
3
4
∫ Before using for the first time
Remove the insulation sheet A.
∫ To replace a button-type battery
Battery type: CR2025 (Lithium battery)
≥ Set the button-type battery with its (i) mark
facing upward.
For table top layout
For wall mounting layout
SC-HTB580P_RQT9922-Y.book 8 ページ ２０１３年１２月１９日 木曜日 午前１１時０分