Setting the time and date – Panasonic EW-BU35W User Manual

Page 12

Advertising
background image

11

BEFORE USE

English

3.

Adjust the "month" --> " date" --> "hour"

--> "minutes" by repeating procedures in

step 2.

4.

Press

to complete the

settings.

This setting cannot be completed by

pressing

before adjusting

the "hour" and "month". Be sure to press

after adjusting the "hour"

and "month" to complete settings.

The set time will disappear after 5 seconds.

To reset, perform the procedures in

*

step 1. to 4.

1.

Hold

(for 3 seconds or

longer).

"year (2011)" will fl ash.

2.

Adjust the "year".

(1) Press

to set the desired

number.

(2) Press

to complete the

setting.

Setting range for years is from 2011 to

2050.

Setting the time and date

Set the date and time before selecting the OFF/ON & START button.

*

Be sure to set the date and time before taking the fi rst measurement after purchasing

*

the blood pressure monitor or after changing the batteries.

During setting, if no button is pressed for 5 minutes or more, the clock will be

*

displayed as "-:--", and the power will be off without saving any settings. It is also

possible to perform measurement and recording even under this circumstance.

However, the record will not include any time information.

Hold

"year"

"month"

mm/dd

"date"

"hour"

"minutes"

Adjust the fl ashing numbers

sequently

Complete setting

Adjust numbers

BU35.indb 11

2011/06/14 14:28:17

Advertising