Advantech SPC-57 - Manual (Page 65)

65
Figure 4.15 Networking via USB port
4.5.3 Networking via PPP
The SPC supports PPP protocol. To setup and utilize it, follow the steps below:
1. Click "Start/Settings/Network and Dial-up Connections”
2. Make a new connection. As the dialogue box pops out, choose the "Dial-Up
Connection". Click "Next".
3. Click "Configure" to setup the device according to the specification of your modem,
and then click "OK" on the top-right corner of the window.
4. Click "Next". Input the telephone number in the "Phone Number" window. Press
"Finish" to complete the setup process.
5. Turn on your modem and use RS-232 cable to connect modem and COM1 of SPC
series.
6. Double click the connection you have made in Step 4. Key in the user name,
password and domain for the dial-up connection and press "Connect".