Panasonic NEC1475 - Manual (Page 8)

- 6 -
SD Memory Card
●
An SD Memory Card is included in the unit purchased. It allows you to store up to 99 Memory
Programmes in the oven.
● Use the card when storing or recalling Memory Programmes.
※You can record the Memory Programme data onto your SD Memory Card using your personal computer.
Refer to “Storing Programme Data on SD Memory Card”.
How to insert / remove the SD Memory Card
※Before you insert / remove an SD Memory Card, always disconnect the oven from the power supply.
Or it is possible, the display window should be blank, otherwise, the data on the SD Memory Card
may be damaged.
1. Unscrew the SD Card Cover and remove it.
2. Push the SD Memory Card with your finger to draw it out.
Then, remove it.
1. Insert an SD Memory Card with its label facing up as indicated
by ▲ mark until it snaps into place.
2. Fit the left edge of the SD Card Cover.
Screw to close at the right-hand side.
How to remove
How to insert
Caution:
1. Always close the SD Card Cover except when an SD Memory Card is inserted / removed in order to
prevent water or dust from entering.
2. Insert only an SD Memory Card specified for this oven. Do not use any other type or substitute SD Memory
Card.
3. Keep the removed SD Memory Card away from static electricity.
4. Do not disassemble or modify SD Memory Cards.
5. Do not apply a physical shock to SD Memory Cards. Do not bend, drop, or get them wet.
6. Do not touch the metal terminals of an SD Memory Card with your hand or metal.
7. Do not remove the label. Do not paste another label onto the SD Memory Card.
8. Do not leave SD Memory Cards in locations subject to high temperatures or direct sunlight.
9. Do not leave SD Memory Cards in locations subject to corrosive gases.
10. If the SD Memory Card is lost or becomes faulty, please contact a Service Engineer to obtain a
replacement.