AGFA E40 - Manual (Page 21)

Chapter 2: Installing the Scanner for PC 21
1 Connect the plug of the AC adapter to your scanner.
2 Plug the adapter cable in the wall outlet.
3 Connect one end of your USB cable to the USB port on your scanner. Make sure you connect
the correct plug as shown in the figure below.
4 Connect the other end of your USB cable to a USB port on your computer. Make sure you
connect it to the correct port as shown in the figure below. A USB port is labeled with the USB
icon .
Windows 98/2000 will now detect the scanner and will install the necessary files for the
scanner hardware driver.