Vm9510ts, Dvd player operation – Audiovox VM9510TS User Manual

Page 19

Advertising
background image

VM9510TS

15

DVD PLAYER OPERATION

NOTE: When properly installed, DVD video cannot be
displayed on the main TFT screen unless the parking brake is
applied. If you attempt to play a DVD while the vehicle is
moving, the TFT screen displays “PARKING” with a blue
background. Rear video screens, if applicable, will operate
normally.

Opening/Closing the TFT Video Screen

Opening the TFT Screen
To open the TFT video screen, press the OPEN (1) button.
The unit beeps and then open.

Closing the TFT Screen
Press the OPEN (1) button again to close the TFT screen. If
the screen is in the “IN” position, it moves out before closing.

Insert/Eject Disc

Upon inserting a DVD disc, DVD mode is entered disc play
begins.

NOTE: If Parental Lock (Rating) is activated and the disc

inserted is not authorized, the 4-digit code must be

entered and/or the disc must be authorized (see

“RATING (Parental Lock) Menu” on page 20).

You cannot insert a disc if there is already a disc in the unit or
if the power is off.

NOTE: CD-R/RW, DVD-R/RW, DVD+R/RWs will not play

unless the recording session is closed.

Ejecting a Disc

Press the button (21) on the unit or remote control (25) to
eject the disc. The unit automatically reverts to Tuner mode.
You may eject a disc with the power off and the unit remains
off after the disc is ejected.

Reset the Loading Mechanism

If the disc loads abnormally or an abnormal core mechanism
operation occurs, press and hold the button (21) on the
unit or remote control (25) to reset the loading mechanism.
Normal operation resumes.

Accessing DVD Mode

To switch to DVD mode when a disc is already inserted,
press the SRC button (15) on the front panel or remote
control (8) until DVD appears at the bottom of the screen.

Using the Touch-Screen Controls

The touch key areas for DVD playback are outlined below.

A – Return to MAIN MENU
B – DISP key: Displays playing information
C – Select previous chapter
D – Select next chapter
E – Display the following on-screen controls: Menu,

,

,

, , , .

Controlling Playback

Stopping Playback
Touch the stop button ( ) on the screen or press the /
BAND button (20) on the remote control to stop DVD play.
Pausing Playback
Touch the play/pause button (

) on the screen or press the

button on the remote control (18) to suspend or resume

disc play.
Slow Motion Playback
Press the button (22) on the remote control or the
button (19) on the joystick to play the current title in slow
motion at 1/2, 1/4, 1/6 or 1/7, the normal speed. Press

(18) to resume normal play. Continue pressing the or
button to slow reverse.
Repeat Playback
Press the REPT button (7) on the remote control to alter
repeat mode according to the following:

DVD: Repeat Title, Repeat Chapter, Repeat Off

VCD (PBC Off): Repeat Single, Repeat Off

MP3: Repeat Single, Repeat Folder, Repeat Off

NOTE: For VCD play, the repeat function is not available

if PBC is on.

Sectional Repeat Function (A-B)
Use the A-B function to define a specific area of a disc to
repeat.

Press the REPT A-B button (6) on the remote control to
set the start point (A) of the repeated section.

Press the REPT A-B button again once you reach the
desired end point (B) of the repeated section. The
selected portion of the DVD will now repeat
continuously.

Press the REPT A-B button again to cancel the A-B
section setting and stop repeat play.

Random Playback
With a DVD, VCD, or CD playing, press the RDM button (33)
on the remote control to activate random playback and play
all chapters/tracks in random order. “On” appears on the
screen.

Press the

button (19) on the remote control or the

button on the joystick (17) to play the next random track.
Press the RDM button again to turn random play off.

NOTE: When a VCD is playing with PBC turned “On”,

activating random playback automatically turns PBC off.

Accessing the DVD Menu

Press the MENU button (1) on the remote control to recall the
main DVD menu. Use the directional (arrow) buttons ( , ,

& ) on the joystick (16, 17, 18, 19) to select a title from

the menu.

Press the TITLE button (2) on the remote control to select a
different title for playback.

Press the

button (18) on the remote control or the

ENTER (joystick) button (20) to confirm your selection and
begin playback.

Moving Through Chapters

Press the

button (19) on the remote control or the

button on the joystick (17) to advance to the next chapter on
the DVD.

Press the

button (17) on the remote control or the

button on the joystick (16) to move to the previous chapter.

Advertising