Agilent Technologies N9360A - Manual (Page 13)

Caution and Safety Requirements 2
N9360A Multi UE Tester Quick Reference Guide 2-3
General
When Operating The Tester
WA R N I N G
The protection provided by the N9360A tester may be impaired if
the tester is used in a manner not specified by Agilent or the
instructions on the display are not followed.
WA R N I N G
DO NOT INSTRUMENT COVERS. Operating personnel must not
remove any instrument covers. Component replacement and
internal adjustments must be made only by qualified service
personnel. Products that appear damaged or defective should be
made inoperative and secured against unintended operation until
they can be repaired by a qualified service personnel.
C A U T I O N
Make sure that the input signal level does not exceed the maximum
level allowed. Tester failure may result otherwise.
C A U T I O N
Do not turn off the Line switch on the rear panel of the Tester while
the LINE LED on the front panel of the Tester is lit in green.
Otherwise, Tester failure may occur.