Panasonic CZRE2C2 - Manual (Page 4)

EN-2
2. Names and Operations
Operation Section
1. (Start/Stop) button
Pushing this button starts, and pushing again
stops the unit.
2. (Temperature setting) buttons
Changing the temperature setting.
3. (Mode Select) button
Pushing this button to select an operation
mode. (AUTO
→ HEAT → DRY →
COOL → FAN ).
4. (Fan speed) button
Changing the fan speed.
( / / / )
5. (Swing/Air direction) button *1
Use this button to set the auto swing or air
direction to a specific angle.
*1 Do not move the flap (vertical airflow
adjustment board) with your hand.
・The flap is automatically directed down
when the unit is stopped.
・The flap is directed up during the HEAT
standby. The flap starts swinging after the
HEAT standby is cancelled, although the
AUTO flap indication on the remote control
unit is displayed during the HEAT standby.
6. (Outing function) button
( Outing Function)
4
5
6
3
2
1
14 12
5 7 3
8
6
9 10
4
11 13
1
15
2
EN