ADS Technologies CD or DVD Hardware - Manual (Page 25)

page 24 page 25
determine if you want to preview with de-interlacing enabled or disabled.
Setting Custom Capture Settings
1) Click Custom Settings button
2) When the custom settings dialog box opens, make your selections.
3) Click OK to save
4) Click “Use Custom Format” to capture with the settings selected.
• Brightness/Color
Here you can make changes to Brightness, Chroma, Contrast, Hue and Saturation.
You can make changes to the Brightness/Color settings only while Previewing or recording video.
1. Move the slider for each setting choice and you will see the adjustment over the next second
or two.
2. If you mess up, Click Reset to restore factory default settings.
3. Click OK to close the box.
• Control
The Control menu gives you another way to control video recording and playback:
The selections are: Preview, Record, Stop, Pause and Play.
• Applications
The Applications menu gives you another way to jump to bundled applications and you can also
change the path of these applications if you happened to install them on a different drive.
1. Click the Applications menu button
2. Click on DVD Movie Factory or Video Studio to Jump to the selected application.
Capture Wizard will automatically close when you do this.
3. Click the Edit button. This will show the default or standard directory path the applications are
normally installed.
4. To change the directory path click the box with the “…” and you can browse to the directory
path you installed the application.
The Options menus provides more selections in customizing your use of the Capture Wizard
application: Click the Options button at the top of the interface to view the Options menu.
Show Splash
If there is a check mark next to this an “ADS” splash screen will appear on your screen when you
start Capture Wizard. To disable, click on “Show Splash” and the check mark will disappear.
Show Wizard
If there is a check mark next to this, the “Capture Wizard” screens will appear on your screen when
you start Capture Wizard. To disable, click on “Show Wizard” and the check mark will disappear.
Preview Immediately at Startup
If this has a check mark next to it; video will begin previewing automatically when you start Capture
Wizard.
• Options: