Connecting the drive cables – Asus 48x/24x/52x CD-RW Drive CRW-4824A User Manual

Page 20

Advertising
background image

20

ASUS CRW-4824A User’s Manual

Connecting the Drive Cables

1. Connect the power cable plug to the power connector on the rear

panel.

2. Connect the 40-pin IDE cable plug to the IDE connector, matching the

red pin stripe on the cable with Pin 1 on the connector.

3. If your computer has a sound card or an onboard audio feature,

connect an audio interface cable to the 4-pin analog audio connector
on the rear of the drive. Connect the other end of the audio cable to the
connector on the sound card or on the 4-pin CD connector on the
motherboard.

CAUTION! All the cable plugs are slotted so that they fit in only one
orientation. If a plug does not fit in completely, try reversing it. DO
NOT use too much force when fitting the cable plugs.

NOTE: Replace the computer cover according to your computer
manual.

4-pin Audio Cable

IDE Cable

Power Cable

Advertising