Sony KDL-70X4500 - Manual (Page 12)

12 GB
Remote and TV Controls/Indicators
Remote and TV controls
Button Description
1 TV "/1 (TV
standby)
Press to turn the TV on and off from standby mode.
2 1 (Power) Press to turn the TV on or off.
~
• To disconnect the TV completely, turn off the TV,
then unplug the AC power cord from the AC
power.
3 (Picture
freeze)
Freezes the TV picture.
~
• This function is not available for a PC input
source.
4 AUDIO In analogue mode: Press to change the dual sound
mode (page 38).
In digital mode: Press to change the language to be
used for the programme currently being viewed
(page 46).
The supplied remote does not function until you register it to the
TV.
~
• To register the remote to the TV for the first time, follow the steps in “6:
Performing the initial set-up” on page 6.
• To re-register the remote to the TV, see “Remote Control Set-up” in “Set-
up” on page 43.
• When the TV function button on the remote flashes three times during
operation in TV mode, replace the batteries of the remote with new ones.
z
• The number 5, N, PROG + and AUDIO buttons on the remote have a
tactile dot. Use the tactile dots as a reference when operating the TV.
A button or touch sensors on the TV will work the same as those on
the remote.
* In the TV menu, these touch sensors will work as
F
/
f
/
G
/
g
/ .