ATEN CS-1732 - Manual (Page 7)

Hardware Requirements
Console
M A VGA, SVGA, or Multisync monitor capable of the highest resolution that
you will be using on any computer in the installation.
M A USB style mouse
M A USB style keyboard
Computer
The following equipment must be installed on each computer:
M A VGA, SVGA or Multisync card.
M Type A USB port.
Cables
Only CS Custom cable sets specifically designed to work with this switch may
be used to link to the computers. Two (CS-1732) or four (CS-1734) 1.2m 4-in-1
cable sets are provided with this package. They use the USB to transfer the
keyboard and mouse input from your console to the computer.
The switches also support computers that use PS/2 connectors to transfer
keyboard and mouse data. Cable sets with PS/2 connectors, as well as longer
cable sets are also available:
Connector Cable Length Part Number
USB 1.2m
USB 1.8m
PS/2 1.2m
PS/2 1.8m
Note: The CS-1732 / CS-1734’s USB hub function only works with USB
cable set connections. It will not work with PS/2 cable set connections.
For additional cables, contact your dealer.
2003-07-17
CS-1732 / CS-1734 User Manual 3