Menu items, Network continued – APC AP9211 User Manual

Page 21

Advertising
background image

MasterSwitch Power Distribution Unit User’s Guide

17

Menu Items

Network

continued

SNMP, continued

Access control.

The

Access Control

section of the

SNMP

menu

identifies the current settings for all four

SNMP

channels and provides

the configurable values for a selected channel.

Trap Receiver.

The

Trap Receiver

section of the

SNMP

menu identifies

the current settings for all four trap receivers and allows you to change
the values for a selected trap receiver.

Item

Definition

Community Name

The password that the

NMS

(identified by the

NMS IP

option)

must use for

SNMP

access to the MasterSwitch

PDU

. The

allowed access type is defined by the

Access Type

option.

Maximum: 15 characters.

NMS IP

Limits access to the

NMS

or

NMSs

specified. You specify the

value as a specific

IP

address for one

NMS

or as an

IP

address

filter for multiple

IP

addresses. For example:

159.215.12.1

allows only the

NMS

with the specific

IP

address

of

159.215.12.1

to have access.

159.215.12.255

allows access for any

NMS

on the

159.215.12

segment.

159.215.255.255

allows access for any

NMS

on the

159.215

segment.

159.255.255.255

allows access for any

NMS

on the 159

segment.

0.0.0.0

or

255.255.255.255

allows access for any

NMS

.

Access Type

Defines what actions the

NMS

that is identified by the

NMS IP

option can perform:

• Write: The

NMS

can use

GETs

and

SETs

.

• Read: The

NMS

can use only

GETs

.

• Disabled: The

NMS

can use neither

GETs

nor

SETs

.

Item

Definition

Community Name

The password that the MasterSwitch

PDU

uses when it

sends traps to the

NMS

identified by the Receiver

NMS IP

option.

Maximum: 15 characters.

Receiver NMS IP

The IP address of the

NMS

that will receive traps sent by

the MasterSwitch

PDU

.

Note:

To send no traps to any

NMS

, set 0.0.0.0 as the

Trap Receiver

IP

.

Trap Generation

Enables or Disables the ability of the MasterSwitch

PDU

to send traps to the

NMS

identified by the

Receiver NMS

IP

option.

Authentication Traps

Enables or Disables the ability of the MasterSwitch

PDU

to send authentication traps to the

NMS

identified by the

Receiver NMS IP

option.

Advertising
This manual is related to the following products: