APC AP9211 - Manual (Page 34)

MasterSwitch Power Distribution Unit User’s Guide 30
Event-Related Menus and Options
Recipients Option
Trap receivers
You can define up to four NMS s to be used as trap receivers when an
event occurs that has SNMP traps enabled.
In the Web interface, use the Trap Receiver settings, available through
the Recipients option of the Events menu.
In the control console, use the SNMP option of the Network menu.
Continued on next page
Item Definition
Community Name
The password ( 15 characters or less) used when traps are
sent to the NMS identified by the Receiver NMS IP setting.
Receiver NMS IP
The IP address of the NMS to which traps are sent. If this
setting is 0.0.0.0 (the default), no traps are sent to any NMS.
Trap Generation
Enables (by default) or disables the sending of any traps to
the
NMS identified by the Receiver NMS IP setting.
Authentication
Traps Enables or disables the sending of authentication traps to the
NMS identified by the Receiver NMS IP setting .