Addonics Technologies NAS2XU2 - Manual (Page 2)

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
For more detailed information on setting up the NAS2XU2 adapter, refer to the
User Manual located on the CD that came with the device.
The NAS 2.0 adapter is a flexible, economical and powerful unit for your Network.
Follow the instructions to help you connect, setup, and configure it.
Note: Any external USB storage device that you connect to the NAS 2.0 adapter
will initially be required to be formatted. This means, if you are connecting an external
USB drive with data on it, the hard drive will be formatted erasing all the information.
Network Environment
There are 3 different setup conditions you can choose:
A. Setup NAS2XU2 as a DHCP Client:
If the NAS2XU2 is connected to a LAN network with an active
DHCP server, it will obtain an IP address from DHCP server
automatically.
B. Setup NAS2XU2 as DHCP Server:
If your LAN network does not have an active DHCP server, the
NAS2XU2 will immediately act as DHCP server and assign itself an
IP address for installation.
C. Setup NAS2XU2 in Static IP environment:
You first need to configure the IP address for NAS2XU2 to operate
in the static IP environment. For Configuring details, please refer to
“LAN Config” setup page.
Illustration of a NAS2XU2 connected over the network