Recording with the dvd copy function, Recording with the dvd copy function ……… 68 – Panasonic -eng User Manual

Page 68

Advertising
background image

68

Advanced Features

Recording on optical discs and SD cards

Recording with the DVD COPY function

If the “DVD COPY function” is used with a video camera which supports this function, the software will start up automatically, and you can
record the video content on the internal HDD of the video camera onto a DVD disc. The second time this function is used, only the new content
is selected automatically for recording.
This is convenient when backing up content captured with the video camera.

Available when using video cameras equipped with the DVD COPY function. For details, refer to the Operating Instructions of the video camera.
DVD COPY works with video content captured on video camera hard disks. SD card content is not supported for backup, and neither are
photos.
Content is recorded in DVD-Video format on DVD-R/RW discs.
Content that does not fit on a single disc is automatically split and recorded over multiple discs.

Preparation:

On the [General] tab of the [Settings] window, select [Enables the
auto startup of the VideoCam Suite]

(→79)

Exit the software if the software is activated.
Load a DVD-R/RW disc for recording
(For a list of supported discs

→11

)

1

Connect the video camera to the
computer.

(→13)

2

Select [DVD COPY] on the video camera.

This software now automatically starts up, new video content
on the video camera hard disk is selected, and the [DVD
COPY] window is displayed.

Tip

Recording requires twice the amount of free space (for a work folder)
equivalent to the capacity of the disc. To change the work folder

(→80)

Discs recorded this way are for playback only. Additional content
cannot be recorded on them.
Video content recorded on the DVD disc cannot be returned to the
video camera.
Video content already recorded on disc with the DVD COPY function
is recognised as recorded. For this reason, the content cannot be
recorded again using the DVD COPY function.
For instructions on specifying details such as the recording speed and
playback method

(→7980)

Important

During recording, do not operate the computer or video camera or
disconnect the USB or power cables.
Before deleting video content from video cameras, always confirm
that all content was recorded correctly on the DVD disc.

Advertising
This manual is related to the following products: