Audiovox FPE3205 - Manual (Page 29)

MAIN MENU
Phase
Aspect Ratio
N/R
Default
Setting System In YPbPr Mode
Setting System
(continued)
Press Menu to display the menu main page.
1
Press CH repeatedly to select System item. 5/6
2
Press Enter to access the submenu.
3
Press VOL+/- repeatedly to adjust the value.
4
The Phase item will be highlighted automatically.
Adjusting Phase
Press Menu to display the menu main page.
1
Press CH repeatedly to select System item. 5/6
2
Press Enter to access the submenu.
3
5
Press CH repeatedly to highlight Aspect Ratio item. 5/6
4
Adjusting Screen Aspect
MAIN MENU
Phase
Aspect Ratio
N/R
Default
16:9
40
Press Menu to display the menu main page.
1
Press CH repeatedly to select System item. 5/6
2
Reducing Picture Noise
5
Press Enter repeatedly to select Off, Auto, Strong, Middle or Weak.
Press CH5/6 repeatedly to select N/R item.
4
Press Enter to access the submenu.
3
MAIN MENU
Phase
Aspect Ratio
N/R
Default
Auto
Loading Default Values
You may quickly load default values by using the Default item.
Note:
You may quickly select the screen aspect by using the Screen button on the remote control.
Setup
Picture
Sound
CH
System
OSD
TVPC
Setup
Picture
Sound
CH
System
OSD
TVPC
Setup
Picture
Sound
CH
System
OSD
TVPC
Press Enter repeatedly to select a desired aspect ratio.
For 480i or 480P signal format, you can select the image aspect ratio between 4:3, 16:9, Panorama and Zoom.
For 720P or 1080i signal format, you can select the image aspect ratio between 4:3 and16:9.
26